Natural-Look Matte Finish Joint Stabilizing Sealer
SB-1300 Joint Stabilizing Sealer is a water-based, single component, acrylic co-polymer sealer and joint sand stabilizer. SB-1300 is specially formulated with an antifungal designed to help inhibit the growth of mold, moss and algae on the sealer film when applied to horizontal and vertical surfaces. This product can be used inside and outside, on old and new pavements, sealing the surface and stabilizing joint sand at the same time. It can be applied immediately after paver installation, as it is breathable and will not trap naturally occurring efflorescence. This breathability feature also decreases freeze thaw damage and improves surface durability and ease of maintenance. SB-1300 is non-hazardous and VOC/EPA compliant. SB-1300 has the consistency of water and is milky white when applied and dries clear, creating a natural look with matte finish. SB-1300 is a single application product. Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to a temperature of 180°F (82°C).
Joint Stabilizing Sealers can be used just as a sealer for pavers, concrete and other masonry surfaces without joint sand stabilization.
Ideal for concrete and clay pavers, decorative or plain concrete, masonry, natural or manufactured stone, unglazed tile and terrazzo.
|Sealing with joint stabilization||80 – 120||7.4 – 11.1|
|Sealing without joint stabilization||150 – 300||13.9 – 27.9|
Note: Single application. Actual coverage may vary depending on the type, age, condition, porosity of the surface, application method and other local conditions such as temperature and humidity.
WARNING: This product can expose you to chemicals known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.